Customization: | Available |
---|---|
Kind: | Digital Oscilloscope |
Channel Number: | 4 |
Suppliers with verified business licenses
Analog channel specifications | |||||||||
S.054A | S.104A | S.204A | S.254A | S.404A | S.604A | S.804A | |||
Input Channels | DSO: 4 analog; MSO: 4 analog, 16digital | ||||||||
Bandwidth (-3db) | 50Ω | 500MHz | 1GHz | 2GHz | 2.5GHz | 4GHz | 6GHz5 | 8GHz5 | |
1MΩ | 500MHz | 500MHz | 500MHz | 500MHz | 500MHz | 500MHz | 500MHz | ||
Vertical resolution | 10 bits, up to16 bits with high-resolution mode | ||||||||
Typical rise/fall time | |||||||||
•10/90% | 860ps | 430ps | 215ps | 172ps | 107.5ps | 71.7ps | 53.8ps | ||
•20/80% | 620ps | 310ps | 155ps | 124ps | 77.5ps | 51.7ps | 33.8ps | ||
ENOB(typical, not using high-resolution mode) | 8.1 | 7.8 | 7.5 | 7.4 | 7.2 | 6.8 | 6.4 | ||
Input impedance | 50Ω ± 3.5%(typically+1%at25°C) | ||||||||
1MΩ ±1%(14 pF typical) | |||||||||
Input sensitivity | 50Ω: 1 mV/div to1 V/div | ||||||||
1MΩ: 1 mV/div to 5 V/div | |||||||||
Input coupling | 50Ω: DC | ||||||||
1MΩ: DC, AC(>11Hz) | |||||||||
Bandwidth limit filters | Analog: 20MHz, 200MHz | ||||||||
Digital: 18.3MHzup to scope bandwidth, in increments of100kHz(under1 GHz) or 10MHz(1 GHz and above). Filter options: Brick Wall, 4th Order Bessel, or Bandpass |
Channel-to-channel isolation | DC to 100MHz: 50 dB | |
100MHz to 1GHz: 40dB | ||
>1GHz: 30 dB | ||
DC gain accuracy | ± 2% full scale(±1%typical) | |
Maxinput voltage | 50Ω: ±5 V | |
1 MΩ: 30 VRMSor ± 40 VMAX(DC+VPEAK). Probing technology allows for testing of higher voltages; the included N2873A 10:1 probe supports 300 VRMS or± 400VMAX(DC+VPEAK). | ||
No transient overvoltage allowed in either the 50 Ω or 1 MΩ path, with or without probes. | ||
Offset range | 50Ω | All verticalranges: ±12 divisions or ± 4 V, whichever is smaller |
1MΩ | <10mV/div: ±2V | |
≥10mV/div: ±5V | ||
≥ 20mV/div: ±10 V | ||
≥100mV/div: ±20 V | ||
≥1 V/div: ± 40 V | ||
Offset accuracy | ≤ 2 V: ±0.1div± 2mV±1% | |
≥ 2 V: ±0.1 div±2mV±1.5% | ||
Dynamicrange | +4 divisions from center screen | |
DC voltage measurementaccuracy | Dual cursor: ±[(DC gain accuracy)+(resolution)] | |
Single cursor: ±[(DC gain accuracy) +(offsetaccuracy)+(resolution/2)] |